Pre-launch Special - Clyde's WIKI Bomber Builds Backlinks While You Slay DIABLO!

[hungryim]

I've added my own targets (by unticking use WikiBomber's built in list) but as soon as I try to create accounts the software crashes:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: wikibomber.exe
Problem Signature 02: 1.0.1.0
Problem Signature 03: 4fc2f7b6
Problem Signature 04: System
Problem Signature 05: 4.0.0.0
Problem Signature 06: 4ee9b7da
Problem Signature 07: 1cd1
Problem Signature 08: 75
Problem Signature 09: System.UriFormatException
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

 

[clyde]

Will this work OK on a VPS with 1 gig of RAM or should I use it on my laptop with 4 gigs of RAM?

It'll perform better from your laptop.

Thanks Clyde - I just updated to the latest version but how do I import my own list of Wikis?

Uncheck "Use Wiki Bomber's built-in list" and then click on "Target URLs" tab, and Import from .txt. Make sure to also select the correct CMS.

 

[apollo_69]

Thanks found it....I don't know which CMS my txt file list contains, probably a mix....is there any easy way to categorise them?

 

[butcher]

So, i just downloaded it. What i want to do is throw a big list of URL's and anchors in but there doesnt seem to be a way to do this. What I want to do is explained below

url1 {url1anchor1|url1anchor2|url1anchor3}
url2 {url2anchor1|url2anchor2|urls2anchor3}
url3 {url3anchor1|url3anchor2|etc...}

So i will have a list of maybe several hundred url's and several anchors relating to each url. I want to spin it so one of my urls and associated anchors is linked in each article. I cant do it like

{url1|url2|url3}{anchor1|anchor2|anchor3}

because the anchor might not match the URL, is there a way to do what I need?

 

[lotez]

Ordered the software without waiting a trial period.
Very simple to use, no learning curve at all.
Set private proxies and all the accounts for spinning/captcha.
Out of 9k wikis got registered almost 7k.
Scraped content and span it. Once i figured out how the syntax for the links worked, span anchors as well.
The whole thing took a few hours from start to finish- including the wait time to make new accounts with sites. i set the thread count pretty low to avoid any potential crushes, and there were none.

So, i'm very happy with the program and it's worth well more than the price.

 

[OldFusser]

Is it just me or do the proxies not rotate? I loaded up about 20 private ones and all connections seemed to only go through the first proxy in the list.

Maybe it's just me but the proxies I have from buyproxies.org suck balls with this app when they are perfectly fine with scrapebox.

I have no problems with wiki bomber creating accounts on the home IP. Even at 10 threads the 1 proxy seems overloaded (latency?) and account creation seizes to a halt for about 5 minutes after the first couple hundred accounts.

Just wondering if proxy rotation would help or if I should just find some better proxies? Fuck a server for personal use, pain in the ass handling the licenses.

 

[Gojippo]

So, i just downloaded it. What i want to do is throw a big list of URL's and anchors in but there doesnt seem to be a way to do this. What I want to do is explained below

url1 {url1anchor1|url1anchor2|url1anchor3}
url2 {url2anchor1|url2anchor2|urls2anchor3}
url3 {url3anchor1|url3anchor2|etc...}

So i will have a list of maybe several hundred url's and several anchors relating to each url. I want to spin it so one of my urls and associated anchors is linked in each article. I cant do it like

{url1|url2|url3}{anchor1|anchor2|anchor3}

because the anchor might not match the URL, is there a way to do what I need?

Why don't you spin by url+anchor block ?
Like : {url1 {url1anchor1|url1anchor2|url1anchor3}|url2 {url2anchor1|url2anchor2|urls2anchor3}|url3 {url3anchor1|url3anchor2|etc...}}

It will associate the correct url to the correct anchors that way.

 

[clyde]

Thanks found it....I don't know which CMS my txt file list contains, probably a mix....is there any easy way to categorise them?

Not at the moment but I'd recommend just using the built in list if you don't know how to categorize them.

So, i just downloaded it. What i want to do is throw a big list of URL's and anchors in but there doesnt seem to be a way to do this. What I want to do is explained below

url1 {url1anchor1|url1anchor2|url1anchor3}
url2 {url2anchor1|url2anchor2|urls2anchor3}
url3 {url3anchor1|url3anchor2|etc...}

So i will have a list of maybe several hundred url's and several anchors relating to each url. I want to spin it so one of my urls and associated anchors is linked in each article. I cant do it like

{url1|url2|url3}{anchor1|anchor2|anchor3}

because the anchor might not match the URL, is there a way to do what I need?

Please see my reply below.

Why don't you spin by url+anchor block ?
Like : {url1 {url1anchor1|url1anchor2|url1anchor3}|url2 {url2anchor1|url2anchor2|urls2anchor3}|url3 {url3anchor1|url3anchor2|etc...}}

It will associate the correct url to the correct anchors that way.

That's right, but the correct format is this:

{[http://www.url1.com/ google]|[http://www.url2.com/ yahoo]|[http://www.url3.com/ bing]}

Ordered the software without waiting a trial period.
Very simple to use, no learning curve at all.
Set private proxies and all the accounts for spinning/captcha.
Out of 9k wikis got registered almost 7k.
Scraped content and span it. Once i figured out how the syntax for the links worked, span anchors as well.
The whole thing took a few hours from start to finish- including the wait time to make new accounts with sites. i set the thread count pretty low to avoid any potential crushes, and there were none.

So, i'm very happy with the program and it's worth well more than the price.

Thank you!

Is it just me or do the proxies not rotate? I loaded up about 20 private ones and all connections seemed to only go through the first proxy in the list.

Maybe it's just me but the proxies I have from buyproxies.org suck balls with this app when they are perfectly fine with scrapebox.

I have no problems with wiki bomber creating accounts on the home IP. Even at 10 threads the 1 proxy seems overloaded (latency?) and account creation seizes to a halt for about 5 minutes after the first couple hundred accounts.

Just wondering if proxy rotation would help or if I should just find some better proxies? Fuck a server for personal use, pain in the ass handling the licenses.

Thanks for reporting that, you're right, there are some glitches with the proxy distribution that we missed, fixing this today!

 

[OldFusser]

Thanks for reporting that, you're right, there are some glitches with the proxy distribution that we missed, fixing this today!

Yup, seems to be working now with the new update.

 

[clyde]

Awesome! Quick bump.

 

[atrendyname]

Is there a way to update the accounts with new wikis? Or maybe have it compare against current list and remove dead wikis and add in new wikis? as my projects get bigger and bigger, so does the file size for the saves and it effects overall performance.

Along with that, is there a template campaign option? So i can just day run selected campaign again and it either makes a copy of the selected campaign or runs it again within the same campaign?

 

[Choller]

Got it.

 

[Kelowna]

Just got to say that this is working great for me. Was having issues with cheap (free) proxies but now everything is running smooth and fast. I do wish there was a way to delete old campaigns and accounts as it is going to look very messing if the old stuff can not get removed... or am I missing something as to how to remove them???

 

[OldFusser]

Curious as to some of your guys completion times to create accounts and to post?

I'm considering moving my license to one of my better computers as this one's cpu sucks dick with scrapebox running too. Shouldn't have activated it on this one in the first place.

 

[clyde]

Is there a way to update the accounts with new wikis? Or maybe have it compare against current list and remove dead wikis and add in new wikis? as my projects get bigger and bigger, so does the file size for the saves and it effects overall performance.

Along with that, is there a template campaign option? So i can just day run selected campaign again and it either makes a copy of the selected campaign or runs it again within the same campaign?

That sounds like a cool feature, we'll implement this if we get enough requests.

Just to be clear, you mean the ability to Right Click -> Duplicate Campaign for existing campaigns?

Got it.

Thank you!

Just got to say that this is working great for me. Was having issues with cheap (free) proxies but now everything is running smooth and fast. I do wish there was a way to delete old campaigns and accounts as it is going to look very messing if the old stuff can not get removed... or am I missing something as to how to remove them???

Hi, that feature is getting implemented this week actually.

Curious as to some of your guys completion times to create accounts and to post?

I'm considering moving my license to one of my better computers as this one's cpu sucks dick with scrapebox running too. Shouldn't have activated it on this one in the first place.

Running Scrapebox simultaneously will affect the performance indeed since there's only so much bandwidth. Just shoot me an email once you decided.

Thanks for all the new purchases!

 

[paulieg]

just purchased without trial on the strength of my experience with unf. a little disappointed i wasn't invited to the beta, but i suppose it's my own fault for not making more of an impression on clyde

-p

 

[clyde]

just purchased without trial on the strength of my experience with unf. a little disappointed i wasn't invited to the beta, but i suppose it's my own fault for not making more of an impression on clyde

-p

Thank you for the purchase Paul!

Well you can still give me feedbacks now, I'm all ears.

 

[matflawless]

Ordered now with no trial
I have UNF and now WB, lets see how cool WB is

 

[adman01]

I thnk I'll try this too!

 

[adman01]

I'm fairly new at this I wonder if an idiot like me can use this?? The price seems awesome!