[WTS] Auto Approve List #4 - 210000 URLs from 4022 domains - limited copies available

Status
Not open for further replies.
loopline

loopline

New member
Feb 16, 2010
349
10
0
Rating - 100%
111   0   0
Selling Auto Approve list #4 for use with scrapebox, xrumer or any other blog commenter that can comment on the same platforms.

This list contain 210,000 urls that are auto approve from 4022 unique domains. This is list Version 4 and they are unique from the last Auto Approve lists that I sold. None of the domains or urls in this list were sold in my prior lists, and none of the domains or urls from my last lists are in these lists.

These domains work with Fast Poster in scrapebox and are derived from the following blog platforms:

Wordpress - Majority of the list is from WordPress
Moveable Type
B2Evolution
May have some BlogEngine too


All of these work in Scrapebox, however this list could be used with any blog commenter that will comment to those platforms.

This list is actual urls and domains that auto approve comments.
List is available for instant download after payment. Payment is via paypal.


I successfully posted to all the urls in this list with only 1 run, in scrapebox!

Note: When posting, depending on your timeouts and connections etc..., you may achieve greater results by re posting to the failed blogs a couple of times.


How would I use this list?

If you want to use it with Scrapebox then you would just load it up in the Blog List field and load in the rest of your names/emails/comments/websites and hit start. Thats it, the list is ready to be commented to.

If you want to use it with another blog commenter you would just load it up like a normal blog list, most generally speaking.


List Format:

The list comes in a .zip format which contains 2 .txt files.

1 file is for all the unique domains, and the other is for all the commentable urls from those domains.


Copies Sold:

There will be a max of 48 Copies of each list sold. (aside from the free reviews).

This list is also being sold eslwhere so the 48 copies will take that into account and its 48 global copies between all places that will be sold. Not 48 copies at each place.


Price:

List 4: Normally $60, but for the first 10 WickedFire members it is only $50.

After the first 10 the price will go to the normal $60.

Just enter Discount Code: WickedFire on the purchase page.

If you purchased a prior list, check your email, you should have received a special email with a special repeat customer price. :)

Payment Via PayPal


Buy now and Download Immediately:

List 4 - Auto Approve List #4 | Scrapebox Lists For Sale

You will be redirected to a download link and the link will be emailed to you.

Use Discount Code: WickedFire


Important Note: If after you purchase, you get redirected to a page that says that the payment proccessor has not yet notified us of your payment. It just means paypal and the payment service I use (e-junkie) are out of sync for a few seconds. Check your email you used to pay and the link will be in your email.


Review Copies:
First 2 people who post in the thread here that have at least 1 itrader and 100 posts can have a free review copy. You must also have scrapebox or some other means of testing this list, and you must actually follow thru and leave a review. :)

Grab your copy before the $10 discount is gone!

Buy - Auto Approve List #4 | Scrapebox Lists For Sale
 


I didn't PR check the 210,000 urls, so I don't know.


I am running a dedicated server in a data center on a dedicated 100Mbit connection. I ran it on 45 timout and 100 connections. Core i5 with 4GB Ram. Of course having good settings for link checking (I use 60 second timeout and 200 connections).

There are certaily urls that are commentable on those domains that are not on this list, I only included the ones I got thru on 1 run. So if you work it there is more there.


I PMd you Flatline.
 
15 copies sold 33 left.

Thanks to all who have bought! If you have purchased please pm me or reply here so I can leave you itrader.
 
no prob, wouldnt ask ya to do all the individs but would ya zip thru the root domains? not tryin to be 'that guy' i just dont wanna drop fifty bucks on pr 0/na
 
Im not at my desk right now, but when I get back to access to my server I will run it through and post back. It will be later tonite.
 
Domain PR Breakdown:

PR8 - 6
PR7 - 27
PR6 - 127
PR5 - 227
PR4 - 388
PR3 - 598
PR2 - 514
PR1 - 448
PR0 / NA - 1693

Yes I know I am missing like 100 domains somewhere in there, but I wasn't going to split hairs over them.

So more then 50% of the domains have Page Rank.

After looking at the PR, I am wondering if I shouldn't have charged more for this....but I suppose its done, I will have to pay attention to that next time when I set the price. Thanks for brining it to my attention googlealchemist!
 
hey brother thanks for that. i genuinely didnt mean to be a pest but knowing the pr of at least the roots if not the urls themselves is a must

a billion pr na/0 doesnt do anyone much good afterall

theres bound to be some juicy high pr pages amongst those, purchased and on your list to get in on the next one as ive missed your previous ones unfortunately

thanks
 
:) Its no worries mate, I appreciate people asking questions, it lends insight where I might not have thought to look. I have learned a great deal about link building in the process of building these lists and offering other services related. So I am always open to learning and looking, the more I can increase my knowledge the more money I can make.

Thanks for buying the list too! You will get a new email when the next list launches, with special discounts.

I think I am going to launch a list that is smaller in a few days, with a lower upfront cost, so lower risk for those that want to get into auto approve without a $50 price tag.

Thanks,

MAtt
 
REVIEW:

loopline was kind enough to give me a review of his latest list. I've either purchased or reviewed all of his lists to date so I've seen how the lists have progressed over time.

First of all, I took the list and randomized it and then picked one URL from each domain to post to. I'm using private proxies which seem to post well to wordpress sites (not to good to blogengine).

At first I had about a 50% success rate which was a little bit disheartening but then I realized I had my timeouts too low so I opened them up to 90 seconds and ran it again on the URLs that failed. I was then up to about 75% success rate which is pretty good for an auto-approved list.

IMPORTANT: Guys, don't slam the list all at once. Pick one URL from each domain and post, then go back and post to the domains again the next day or something like that. Posting to the whole list at once will kill this list in no time. The list that loopline sold for $100 can still be posted to with no problems. Since people paid the higher dollar amount they've taken care of the list and not totally spammed to it all at once.


SUMMARY: I wouldn't of hesitated to buy this list if loopline didn't give me a free review. His lists are by far the best on the forum. One recommendation I have for loopline is to keep the price high ($75 or more). That'll keep people from spamming it all at once since they paid more for the list.
 
Thanks for the detailed review FlatLine! In accordance with it, I have been talking with someone via PM, I figured that posting it here would be good to help people understand.


susuanlulu said:
I random select 4000 unique domain url from your 210000 url, only one url in one different domain. So that is about 4000 url, then I reoptimize our scrapebox to post, now 855 success, not too bad.

2) Then I check the back link of all these 855 links, only find 346 backlinks.

3) Then check the dofollow status, only 2 dofollow, too bad.


susuanlulu
Click to expand...


Well your not optimized correctly likely. As flatline said, you need to turn your connections down and your timeouts up. If you on a home internet connection with good dns servers then you should try 50 connections or less. If you are on a home internet connection with poor dns servers, like comcast in the US, you need to put your connections at like 20 or less for optimal posting. These are both assuming you are using some high quality private proxies.

If you are using public proxies then you are going to have to plan on reposting 2-6 times to the failed. Private proxies are recommended.

For timeouts on a home connection set them to 60 seconds or greater.


If your on a server in a data center, then you can be a bit more liberal, like 100 connections on a 45 timeout with private proxies.



Also important to realize is if you don't have your link checker setup correctly then it isnt going to find all the links.

So again on a home connection with good dns go for something like 100 connections or less with a 90 timeout.

On a server I use 200 connections with a 60 timeout.

All of this is assuming you have at least a 12 Mbit/1Mbit connection that you are using just for sbox.

Of course reposting failed once or twice will always increase you numbers.


I will say that I placed a link on every single one of the 210000 urls in this list, as well as others. There are other urls on these domains that I could have posted to if I had done more then 1 run, so you can scrape other urls off these domains as well.

That said, servers go up and down, admins change settings, your internet connection can be clogged, a million things can happen, so experiment and see what works for you. Its like cooking on a stove, there are more settings then High. :)
 
Hi,
I purchased your list last night. I randomly picked 100 URLs from the list and threw them into scrapebox, hoping to get some backlinks to one of my inner money pages. I selected "WordPress" as the "Comment Poster" type. My success rate was 0%...mostly 404 and "field not found" errors. Am I doing something wrong? Surely out of 100, I'd get at least 30% success? I'm fairly new to Scrapebox, though I have scraped my own stuff had get about a 20% success rate when i do. (I use paid private proxies). Perhaps I'm not doing something right in Scrapebox. Any help is much appreciated.
 
vudoo said:
Hi,
I purchased your list last night. I randomly picked 100 URLs from the list and threw them into scrapebox, hoping to get some backlinks to one of my inner money pages. I selected "WordPress" as the "Comment Poster" type. My success rate was 0%...mostly 404 and "field not found" errors. Am I doing something wrong? Surely out of 100, I'd get at least 30% success? I'm fairly new to Scrapebox, though I have scraped my own stuff had get about a 20% success rate when i do. (I use paid private proxies). Perhaps I'm not doing something right in Scrapebox. Any help is much appreciated.
Click to expand...


Sounds to me at the very least you're using an older version of scrapebox. The newer versions you don't select the type of blog, just fast or slow posting. Also, make sure your settings are correct as stated above.

Also, which service do you have for your private proxies?
 
Status
Not open for further replies.
Top Bottom
Back